Model AR01

A Pt100 sensor hosed in a ventilated wall mounting box

AR01 - Resistance Thermometer: Pt100

Model BL01

A surface mounting brass block with locating pin, designed specifically for use in the plastics industry. 

BL01 - Fabricated Thermo couple and Resistance Thermometers: Pt100 / J or K

Model BW01

Bead weld sensor. This sensor is the most simple type of thermocouple. The thermocouple junction is formed directly on the end of a length of thermocouple extension cable.

BW01 - Fabricated Thermocouple: J / K or T

Model BW02

Pharmaceutical bead weld sensor loom for use in the pharmaceutical industry. The loom consists of multiple bead weld assemblies bound together, with each hot junction and cold junction marked for identification.

BW02 - Fabricated Thermocouple: J / K or T

Model FS01

Flexi-couple - Standard. Designed for use mainly in the plastics industry, but also used in other industries, this flexible thermocouple assembly incorporates an adjustable bayonet cap, which allows for various insertion depths.

FS01 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model FS02

Flexi-couple - American. Designed for use mainly in the plastics industry, but also used in other industries, this flexible thermocouple assembly incorporates an adjustable bayonet cap, which allows for various insertion depths.

FS02 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model FS03

Flexi-couple - Italian. Designed for use mainly in the plastics industry, but also used in other industries, this flexible thermocouple assembly incorporates an adjustable bayonet cap, which allows for various insertion depths.

FS03 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model FS04

Flexi-couple - Continental. Designed for use mainly in the plastics industry, but also used in other industries, this flexible thermocouple assembly incorporates an adjustable bayonet cap, which allows for various insertion depths.

FS04 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Hot plate flexi-couple assembly designed for use on hot plates. The rear of the sensor has additional strain relief to reduce breakdown due to movement of the sensor.

FS05 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model LF01

Leaf thermocouple. A fast response sensor mounted on a 25mm x 13mm stainless steel plate, making it ideal for fitting under band and nozzle heaters.

LF01 - Fabricated Thermocouple: J or K

Model MB01

Melt Bolt sensor. Designed to withstand the very high pressure experienced within the nozzles of plastics extruders and injection moulding machines. ¹/₂"UNF-20 process thread.

MB01 - Fabricated Thermocouple: J or K

Model MB02

Twist Melt Bolt sensor. Designed to withstand the very high pressure experienced within the nozzles of plastics extruders and injection moulding machines. ¹/₂"UNF-20 or M18x1.5 process thread.

MB02 - Fabricated Thermocouple: J or K

Model MB03

Twist Melt Bolt sensor with Hastelloy^® tip. Designed to withstand the very high pressure experienced within the nozzles of plastics extruders and injection moulding machines. ¹/₂"UNF-20 or M18x1.5 process thread.

MB03 - Fabricated Thermocouple: J or K

Model MB04

Adjustable Melt Bolt sensor. An alternative style of melt thermocouple, which allows simple, rapid adjustment of the immersion length. ¹/₂"UNF-20 process thread.

MB04 - Mineral Insulated Thermocouple: J or K

Model MB05

Twist Melt Bolt sensor with thermally insulated tip. Designed to withstand the very high pressure experienced within the nozzles of plastics extruders and injection moulding machines. ¹/₂"UNF-20 or M18x1.5 process thread.

MB05 - Fabricated Thermocouple: J or K

Model MB06

Twist Melt Bolt sensor with special fast response construction and thermally insulated tip. Designed to withstand the very high pressure experienced within the nozzles of plastics extruders and injection moulding machines. ¹/₂"UNF-20 or M18x1.5 process thread.

MB06 - Fabricated Thermocouple: J or K

Model MG01

Magnet sensor. This thermocouple combines a grounded thermocouple junction mounted into a magnet, for fast response ferrous metal surface temperature measurement.

MG01 - Fabricated Thermocouple: J or K

Model MX01

Dough mould mixer probe. A threaded sensor with a domed tip designed to be fitted by protruding through the outer skin of a dough mould / mixer an is fixed into place with 2 locknuts (supplied with sensor)

MX01 - Resistance Thermometer: Pt100

Model MX02

Mushroom style mixer probe. A mushroom shaped sensor designed to be fitted by protruding through the outer skin of a dough mould / mixer an is fixed into place with 2 locknuts (supplied with sensor)

MX02 - Resistance Thermometer: Pt100

Model MX03

G style mixer probe. The sensor consists of a special stainless steel body designed to be fitted by protruding through the outer skin of a dough mould / mixer an is fixed into place with 2 locknuts (supplied with sensor)

MX03 - Resistance Thermometer: Pt100

Model NZ01

Free-running Nozzle, which allows the sensor to be threaded directly into the process without turning or twisting the wires. M6 or 1/4BSF process thread.

NZ01 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model NZ02

Free-running Nozzle sensor - probe mounted, which allows the sensor to be threaded directly into the process without turning or twisting the wires. M6 or 1/4BSF process thread.

NZ02 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model PC01

Pipe clip sensor, various sizes of clip available with a cable lead-out.

PC01 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model PT01

Self-adhesive silicon rubber Patch sensor with lead-out

PT01 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model RS01/RS02

Roller surface probe. A replaceable tip thermocouple, housed in a PTFE body machined from solid material. The spring-loaded tip is placed in contact with a fixed or moving surface for accurate surface temperature measurement. Available with an M20 process thread.

RS01 - Fabricated Thermocouple: J or K

RS02 - Fabricated Thermocouple (M20 process): J or K

Model SF01

A bolt down Surface probe brazed to a brass flange which ensures the hot junction is in contact with the surface.

SF01 - Fabricated Thermocouple: J or K

Model SP01

Spark plug sensor is a Pt100, housed in an aluminium ring, which can be mounted under a spark plug.

SP01 - Resistance Thermometer: Pt100

Model WA01

Washer style sensor with the hot junction housed in a stainless steel washer for bolting onto a surface.

WA01 - Fabricated Thermocouple and Resistance Thermometer: Pt100 / J or K

Model WR01

Washer ring crimp sensor with the hot junction located in a crimp terminal. for bolting onto a surface.

WR01 - Fabricated Thermocouple: J or K