Model PR01/PR02

A general purpose probe assembly with cable lead-out. 3.0mm / 4.5mm or 6.0mm diameter

PR01 - High temperature Resistance Thermometer and Mineral Insulated Thermocouples: Pt100 / J / K / K (Inconel^®) / T or N

PR02 - Standard temperature Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

Model PR03/PR04

A 4.5mm diameter probe with spring-loaded bayonet fitting assembly with a choice of bayonet cap sizes.

PR03 - High temperature Mineral Insulated Thermocouples: J / K / T or N

PR04 - Standard temperature Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

Model PR05/PR06

A 4.5mm diameter probe with spring-loaded bayonet fitting assembly with a choice of bayonet cap sizes. The assembly comes complete with 90° bend and 50mm lagging.

PR05 - High temperature Mineral Insulated Thermocouples: J / K / T or N

PR06 - Standard temperature Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

Model PR07

Mineral Insulated thermocouple terminated in standard 2-pin plug

PR07 - Mineral Insulated thermocouple: J / K / K (Inconel^®) / T or N

Model PR08

Mineral Insulated thermocouple terminated with flying tails

PR08 - Mineral Insulated thermocouple: J / K / K (Inconel^®) / T or N

Model PR09/PR10

An air-ducted / exposed probe assembly with cable lead-out. 3.0mm / 4.5mm or 6.0mm diameter

PR09 - High temperature Resistance Thermometer and Mineral Insulated Thermocouples: Pt100 / J / K / K (Inconel^®) / T or N

PR10 - Standard temperature Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

Model PR11

Small diameter (0.5mm / 1.0mm / 1.5mm or 2.0mm) Mineral Insulated probe with cable lead-out

PR11 Mineral Insulated Thermocouples: J / K / K (Inconel^®) / T or N

Model PR12

Small diameter (0.5mm / 1.0mm / 1.5mm or 2.0mm) Mineral Insulated probe terminated in a mini 2-pin plug

PR12 Mineral Insulated Thermocouples: J / K / K (Inconel^®) / T or N

Model PR13

Small diameter (0.5mm / 1.0mm / 1.5mm or 2.0mm) Mineral Insulated probe terminated with flying tails

PR12 Mineral Insulated Thermocouples: J / K / K (Inconel^®) / T or N

Model PR14

Autoclave probe. Type T fabricated thermocouple incorporating PTFE lapped and sintered lead-out.

PR14 - Fabricated Thermocouple: T

Model PR15

Cooker / oven probe, 4.0mm Ø x 100mm long with a pointed tip. Pt100. Designed to withstand the ingress of moisture

PR15 - Resistance Thermometer: Pt100

Model PR16

Dairy / Pasteurisation probe with ¹/₈" (3.18mm) reduced tip. Secured into place with a ¹/₈BSP captive nut. Pt100.

PR16 - Resistance Thermometer: Pt100

Model PR17

Dry air sterilizer / Environmental chamber probe. The sensor utilises a ¹/₃^rd Din detector for greater accuracy and a screened PTFE cable designed specifically for this application

PR17 - Resistance Thermometer: Pt100 ¹/₃^rd Din

Model PR18

Thermally isolated probe for reduced cold end effect and increased time response with a reduced tip. ³/₈" Ø with Nylatron^® insulator and ¹/₈" reduced tip.

PR18 - Resistance Thermometer: Pt100

A general purpose probe assembly with a fixed process thread and reduced tip and cable lead-out. 4.5mm diameter with 3mm reduced tip.

PR19 - Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

These are general purpose probe assemblies with a tri-clamp fitting, cable and terminated in flying tails.

PR20 - Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

These are general purpose probe assemblies with an RJT fitting, cable and terminated in flying tails.

PR21 - Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

These are general purpose probe assemblies with an IDF fitting, cable and terminated in flying tails.

PR22 - Resistance Thermometer and Fabricated Thermocouples: Pt100 / J / K / T or N

The submersible probe assembly is available as a Pt100 only. The sensor consists of a s/s body with a reduced tip housing a Pt100 detector.

PR23 - Resistance Thermometer Pt100

These are Reference sensors and are available in Pt100 or Type N and these sensors come complete with a 6 point calibration and full certification from a Nationally Accredited Laboratory

PR24 - Resistance Thermometer Pt100

PR25 - Mineral Insulated Type N

A high temperature furnace probe with a ceramic sheath. 6.0 / 8.0 / 12.0 or 17.0mm Ø ceramic sheath.

PR26 - High temperature Thermocouples: K / R or S